generated from Template/H563ZI-HAL-CMake-Template
fix: Set LF line endings for assembly files
This commit is contained in:
410
Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_hal_gpio.h
Normal file
410
Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_hal_gpio.h
Normal file
@@ -0,0 +1,410 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h5xx_hal_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32H5xx_HAL_GPIO_H
|
||||
#define STM32H5xx_HAL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32h5xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32H5xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO GPIO
|
||||
* @brief GPIO HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be a value of @ref GPIO_pins */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_mode */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_pull */
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_speed */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
|
||||
This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
|
||||
} GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_RESET = 0U,
|
||||
GPIO_PIN_SET
|
||||
} GPIO_PinState;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup GPIO_pins GPIO pins
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
|
||||
#define GPIO_PIN_ALL ((uint16_t)0xFFFF) /* All pins selected */
|
||||
|
||||
#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_mode GPIO mode
|
||||
* @brief GPIO Configuration Mode
|
||||
* Elements values convention: 0xX0yz00YZ
|
||||
* - X : GPIO mode or EXTI Mode
|
||||
* - y : External IT or Event trigger detection
|
||||
* - z : IO configuration on External IT or Event
|
||||
* - Y : Output type (Push Pull or Open Drain)
|
||||
* - Z : IO Direction mode (Input, Output, (Alternate or Analog))
|
||||
* @{
|
||||
*/
|
||||
/*!< Input Floating Mode */
|
||||
#define GPIO_MODE_INPUT (0x00000000U)
|
||||
/*!< Output Push Pull Mode */
|
||||
#define GPIO_MODE_OUTPUT_PP (0x00000001U)
|
||||
/*!< Output Open Drain Mode */
|
||||
#define GPIO_MODE_OUTPUT_OD (0x00000011U)
|
||||
/*!< Alternate Function Push Pull Mode */
|
||||
#define GPIO_MODE_AF_PP (0x00000002U)
|
||||
/*!< Alternate Function Open Drain Mode */
|
||||
#define GPIO_MODE_AF_OD (0x00000012U)
|
||||
/*!< Analog Mode */
|
||||
#define GPIO_MODE_ANALOG (0x00000003U)
|
||||
/*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING (0x10110000U)
|
||||
/*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_FALLING (0x10210000U)
|
||||
/*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING_FALLING (0x10310000U)
|
||||
/*!< External Event Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING (0x10120000U)
|
||||
/*!< External Event Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_FALLING (0x10220000U)
|
||||
/*!< External Event Mode with Rising/Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_speed GPIO speed
|
||||
* @brief GPIO Output Maximum frequency
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Low speed */
|
||||
#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< Medium speed */
|
||||
#define GPIO_SPEED_FREQ_HIGH (0x00000002U) /*!< High speed */
|
||||
#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003U) /*!< Very-high speed */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pull GPIO pull
|
||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
|
||||
#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
|
||||
#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
|
||||
|
||||
/** @defgroup GPIO_attributes GPIO attributes
|
||||
* @brief GPIO pin secure or non-secure attributes
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_SEC (0x00000001U) /*!< Secure pin attribute */
|
||||
#define GPIO_PIN_NSEC (0x00000000U) /*!< Non-secure pin attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* __ARM_FEATURE_CMSE */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified EXTI line is rising edge asserted or not.
|
||||
* @param __EXTI_LINE__: specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clear the EXTI's line rising pending bits.
|
||||
* @param __EXTI_LINE__: specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified EXTI line is falling edge asserted or not.
|
||||
* @param __EXTI_LINE__: specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clear the EXTI's line falling pending bits.
|
||||
* @param __EXTI_LINE__: specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified EXTI line is asserted or not.
|
||||
* @param __EXTI_LINE__: specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (__HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) || \
|
||||
__HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clear the EXTI's line pending bits.
|
||||
* @param __EXTI_LINE__: specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) \
|
||||
do { \
|
||||
__HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__); \
|
||||
__HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__); \
|
||||
} while(0)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Generate a Software interrupt on selected EXTI line(s).
|
||||
* @param __EXTI_LINE__: specifies the EXTI line to set.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified EXTI line flag is set or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__)
|
||||
|
||||
/**
|
||||
* @brief Clear the EXTI line pending flags.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||||
|
||||
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
|
||||
(((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
|
||||
|
||||
#define IS_GPIO_SINGLE_PIN(__PIN__) (((__PIN__) == GPIO_PIN_0) ||\
|
||||
((__PIN__) == GPIO_PIN_1) ||\
|
||||
((__PIN__) == GPIO_PIN_2) ||\
|
||||
((__PIN__) == GPIO_PIN_3) ||\
|
||||
((__PIN__) == GPIO_PIN_4) ||\
|
||||
((__PIN__) == GPIO_PIN_5) ||\
|
||||
((__PIN__) == GPIO_PIN_6) ||\
|
||||
((__PIN__) == GPIO_PIN_7) ||\
|
||||
((__PIN__) == GPIO_PIN_8) ||\
|
||||
((__PIN__) == GPIO_PIN_9) ||\
|
||||
((__PIN__) == GPIO_PIN_10) ||\
|
||||
((__PIN__) == GPIO_PIN_11) ||\
|
||||
((__PIN__) == GPIO_PIN_12) ||\
|
||||
((__PIN__) == GPIO_PIN_13) ||\
|
||||
((__PIN__) == GPIO_PIN_14) ||\
|
||||
((__PIN__) == GPIO_PIN_15))
|
||||
|
||||
#define IS_GPIO_COMMON_PIN(__RESETMASK__, __SETMASK__) \
|
||||
(((uint32_t)(__RESETMASK__) & (uint32_t)(__SETMASK__)) == 0x00u)
|
||||
|
||||
#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
|
||||
((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
|
||||
((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
|
||||
((__MODE__) == GPIO_MODE_AF_PP) ||\
|
||||
((__MODE__) == GPIO_MODE_AF_OD) ||\
|
||||
((__MODE__) == GPIO_MODE_IT_RISING) ||\
|
||||
((__MODE__) == GPIO_MODE_IT_FALLING) ||\
|
||||
((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||||
((__MODE__) == GPIO_MODE_EVT_RISING) ||\
|
||||
((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
|
||||
((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||||
((__MODE__) == GPIO_MODE_ANALOG))
|
||||
|
||||
#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
|
||||
((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
|
||||
((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\
|
||||
((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH))
|
||||
|
||||
#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
|
||||
((__PULL__) == GPIO_PULLUP) || \
|
||||
((__PULL__) == GPIO_PULLDOWN))
|
||||
|
||||
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
|
||||
|
||||
#define IS_GPIO_PIN_ATTRIBUTES(__ATTRIBUTES__) (((__ATTRIBUTES__) == GPIO_PIN_SEC) ||\
|
||||
((__ATTRIBUTES__) == GPIO_PIN_NSEC))
|
||||
|
||||
#endif /* __ARM_FEATURE_CMSE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include GPIO HAL Extended module */
|
||||
#include "stm32h5xx_hal_gpio_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
|
||||
* @brief GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
|
||||
* @brief Initialization and Configuration functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, const GPIO_InitTypeDef *pGPIO_Init);
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *****************************************************/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(const GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||||
void HAL_GPIO_WriteMultipleStatePin(GPIO_TypeDef *GPIOx, uint16_t PinReset, uint16_t PinSet);
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EnableHighSPeedLowVoltage(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_DisableHighSPeedLowVoltage(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group3 IO attributes management functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO attributes management functions *****************************************/
|
||||
void HAL_GPIO_ConfigPinAttributes(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, uint32_t PinAttributes);
|
||||
HAL_StatusTypeDef HAL_GPIO_GetConfigPinAttributes(const GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin,
|
||||
uint32_t *pPinAttributes);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* __ARM_FEATURE_CMSE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32H5xx_HAL_GPIO_H */
|
||||
Reference in New Issue
Block a user