SocChina2025/BlindCane
1
0
Fork 0
generated from Template/H563ZI-HAL-CMake-Template
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
83d9a263a4ffa8903fae791d9048da7ecd7606d7
BlindCane/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_exti.h
SocChina2025 7f9bede0c7 Initial commit
2025-05-07 22:22:44 +08:00

2268 lines
87 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32h5xx_ll_exti.h
* @author MCD Application Team
* @brief Header file of EXTI LL module.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H5xx_LL_EXTI_H
#define STM32H5xx_LL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h5xx.h"
/** @addtogroup STM32H5xx_LL_Driver
* @{
*/
#if defined (EXTI)
/** @defgroup EXTI_LL EXTI
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
#define LL_EXTI_REGISTER_PINPOS_SHFT 16U /*!< Define used to shift pin position in EXTICR register */
/* Private Macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
* @{
*/
typedef struct
{
uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
} LL_EXTI_InitTypeDef;
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_LL_EC_LINE LINE
* @{
*/
#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */
#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */
#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */
#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */
#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */
#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */
#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */
#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */
#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */
#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */
#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */
#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */
#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */
#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */
#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */
#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */
#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */
#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */
#if defined(EXTI_IMR1_IM18)
#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */
#endif /* EXTI_IMR1_IM18 */
#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */
#if defined(EXTI_IMR1_IM20)
#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */
#endif /* EXTI_IMR1_IM20 */
#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */
#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */
#if defined(EXTI_IMR1_IM23)
#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */
#endif /* EXTI_IMR1_IM23 */
#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */
#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */
#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */
#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */
#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */
#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */
#if defined(EXTI_IMR1_IM30)
#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */
#endif /* EXTI_IMR1_IM30 */
#if defined(EXTI_IMR1_IM31)
#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */
#endif /* EXTI_IMR1_IM31 */
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved */
#if defined(EXTI_IMR2_IM32)
#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */
#endif /* EXTI_IMR2_IM32 */
#if defined(EXTI_IMR2_IM33)
#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */
#endif /* EXTI_IMR2_IM33 */
#if defined(EXTI_IMR2_IM34)
#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */
#endif /* EXTI_IMR2_IM34 */
#if defined(EXTI_IMR2_IM35)
#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */
#endif /* EXTI_IMR2_IM35 */
#if defined(EXTI_IMR2_IM36)
#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */
#endif /* EXTI_IMR2_IM36 */
#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */
#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */
#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */
#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */
#define LL_EXTI_LINE_41 EXTI_IMR2_IM41 /*!< Extended line 41 */
#define LL_EXTI_LINE_42 EXTI_IMR2_IM42 /*!< Extended line 42 */
#if defined(EXTI_IMR2_IM43)
#define LL_EXTI_LINE_43 EXTI_IMR2_IM43 /*!< Extended line 43 */
#endif /* EXTI_IMR2_IM43 */
#if defined(EXTI_IMR2_IM44)
#define LL_EXTI_LINE_44 EXTI_IMR2_IM44 /*!< Extended line 44 */
#endif /* EXTI_IMR2_IM44 */
#if defined(EXTI_IMR2_IM45)
#define LL_EXTI_LINE_45 EXTI_IMR2_IM45 /*!< Extended line 45 */
#endif /* EXTI_IMR2_IM45 */
#if defined(ETH)
#define LL_EXTI_LINE_46 EXTI_IMR2_IM46 /*!< Extended line 46 */
#endif /* ETH */
#define LL_EXTI_LINE_47 EXTI_IMR2_IM47 /*!< Extended line 47 */
#if defined(EXTI_IMR2_IM48)
#define LL_EXTI_LINE_48 EXTI_IMR2_IM48 /*!< Extended line 48 */
#endif /* EXTI_IMR2_IM48 */
#define LL_EXTI_LINE_49 EXTI_IMR2_IM49 /*!< Extended line 49 */
#define LL_EXTI_LINE_50 EXTI_IMR2_IM50 /*!< Extended line 50 */
#if defined(EXTI_IMR2_IM51)
#define LL_EXTI_LINE_51 EXTI_IMR2_IM51 /*!< Extended line 51 */
#endif /* EXTI_IMR2_IM51 */
#if defined(EXTI_IMR2_IM52)
#define LL_EXTI_LINE_52 EXTI_IMR2_IM52 /*!< Extended line 52 */
#endif /* EXTI_IMR2_IM52 */
#define LL_EXTI_LINE_53 EXTI_IMR2_IM53 /*!< Extended line 53 */
#if defined(EXTI_IMR2_IM54)
#define LL_EXTI_LINE_54 EXTI_IMR2_IM54 /*!< Extended line 54 */
#endif /* EXTI_IMR2_IM54 */
#if defined(EXTI_IMR2_IM55)
#define LL_EXTI_LINE_55 EXTI_IMR2_IM55 /*!< Extended line 55 */
#endif /* EXTI_IMR2_IM55 */
#if defined(EXTI_IMR2_IM56)
#define LL_EXTI_LINE_56 EXTI_IMR2_IM56 /*!< Extended line 56 */
#endif /* EXTI_IMR2_IM56 */
#if defined(EXTI_IMR2_IM57)
#define LL_EXTI_LINE_57 EXTI_IMR2_IM57 /*!< Extended line 57 */
#endif /* EXTI_IMR2_IM57 */
#if defined(EXTI_IMR2_IM58)
#define LL_EXTI_LINE_58 EXTI_IMR2_IM58 /*!< Extended line 58 */
#endif /* EXTI_IMR2_IM58 */
#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< ALL Extended lines */
#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
#if defined(USE_FULL_LL_DRIVER)
#define LL_EXTI_LINE_NONE 0x00000000U /*!< None Extended line */
#endif /*USE_FULL_LL_DRIVER*/
/** @defgroup SYSTEM_LL_EC_EXTI_PORT EXTI EXTI PORT
* @{
*/
#define LL_EXTI_EXTI_PORTA 0U /*!< EXTI PORT A */
#define LL_EXTI_EXTI_PORTB EXTI_EXTICR1_EXTI0_0 /*!< EXTI PORT B */
#define LL_EXTI_EXTI_PORTC EXTI_EXTICR1_EXTI0_1 /*!< EXTI PORT C */
#define LL_EXTI_EXTI_PORTD (EXTI_EXTICR1_EXTI0_1|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT D */
#if defined(GPIOE)
#define LL_EXTI_EXTI_PORTE EXTI_EXTICR1_EXTI0_2 /*!< EXTI PORT E */
#endif /* GPIO E */
#if defined(GPIOF)
#define LL_EXTI_EXTI_PORTF (EXTI_EXTICR1_EXTI0_2|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT F */
#endif /* GPIO F */
#if defined(GPIOG)
#define LL_EXTI_EXTI_PORTG (EXTI_EXTICR1_EXTI0_2|EXTI_EXTICR1_EXTI0_1) /*!< EXTI PORT G */
#endif /* GPIO G */
#define LL_EXTI_EXTI_PORTH (EXTI_EXTICR1_EXTI0_2|EXTI_EXTICR1_EXTI0_1|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT H */
#if defined(GPIOI)
#define LL_EXTI_EXTI_PORTI EXTI_EXTICR1_EXTI0_3 /*!< EXTI PORT I */
#endif /* GPIO I */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_EXTI_LINE EXTI EXTI LINE
* @{
*/
#define LL_EXTI_EXTI_LINE0 ((0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */
#define LL_EXTI_EXTI_LINE1 ((8U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */
#define LL_EXTI_EXTI_LINE2 ((16U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_16 | EXTICR[0] */
#define LL_EXTI_EXTI_LINE3 ((24U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_24 | EXTICR[0] */
#define LL_EXTI_EXTI_LINE4 ((0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */
#define LL_EXTI_EXTI_LINE5 ((8U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */
#define LL_EXTI_EXTI_LINE6 ((16U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_16 | EXTICR[1] */
#define LL_EXTI_EXTI_LINE7 ((24U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_24 | EXTICR[1] */
#define LL_EXTI_EXTI_LINE8 ((0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */
#define LL_EXTI_EXTI_LINE9 ((8U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */
#define LL_EXTI_EXTI_LINE10 ((16U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_16 | EXTICR[2] */
#define LL_EXTI_EXTI_LINE11 ((24U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_24 | EXTICR[2] */
#define LL_EXTI_EXTI_LINE12 ((0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */
#define LL_EXTI_EXTI_LINE13 ((8U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */
#define LL_EXTI_EXTI_LINE14 ((16U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_16 | EXTICR[3] */
#define LL_EXTI_EXTI_LINE15 ((24U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_24 | EXTICR[3] */
/**
* @}
*/
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EC_MODE Mode
* @{
*/
#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
/**
* @}
*/
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
* @{
*/
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
* @{
*/
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in EXTI register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
/**
* @brief Read a value in EXTI register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63
* @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_45
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63
* @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_45
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR2, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
* @note The reset value for the direct or internal lines (see RM)
* is set to 1 in order to enable the interrupt by default.
* Bits are set automatically at Power on.
* @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63
* @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_45
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
*
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
* @{
*/
/**
* @brief Enable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Event request for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_45
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR2, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
* @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
*
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR2, ExtiLine);
}
/**
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
* @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Check if rising edge trigger is enabled for Lines in range 32 to 63
* @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR2, ExtiLine);
}
/**
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
* @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Check if falling edge trigger is enabled for Lines in range 32 to 63
* @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
* @{
*/
/**
* @brief Generate a software Interrupt Event for Lines in range 0 to 31
* @note If the interrupt is enabled on this line in the EXTI_C1IMR1, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR1
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR1
* register (by writing a 1 into the bit)
* @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER1, ExtiLine);
}
/**
* @brief Generate a software Interrupt Event for Lines in range 32 to 63
* @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR2
* register (by writing a 1 into the bit)
* @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER2, ExtiLine);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
* @{
*/
/**
* @brief Check if the ExtLine Falling Flag is set or not for Lines in range 0 to 31
* @note This bit is set when the falling edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll FPR1 FPIFx LL_EXTI_IsActiveFallingFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFallingFlag_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->FPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Check if the ExtLine Falling Flag is set or not for Lines in range 32 to 63
* @note This bit is set when the falling edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll FPR2 FPIFx LL_EXTI_IsActiveFallingFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFallingFlag_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->FPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Read ExtLine Combination Falling Flag for Lines in range 0 to 31
* @note This bit is set when the falling edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll FPR1 FPIFx LL_EXTI_ReadFallingFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFallingFlag_0_31(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->FPR1, ExtiLine));
}
/**
* @brief Read ExtLine Combination Falling Flag for Lines in range 32 to 63
* @note This bit is set when the falling edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll FPR2 FPIFx LL_EXTI_ReadFallingFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFallingFlag_32_63(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->FPR2, ExtiLine));
}
/**
* @brief Clear ExtLine Falling Flags for Lines in range 0 to 31
* @note This bit is set when the falling edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll FPR1 FPIFx LL_EXTI_ClearFallingFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFallingFlag_0_31(uint32_t ExtiLine)
{
WRITE_REG(EXTI->FPR1, ExtiLine);
}
/**
* @brief Clear ExtLine Falling Flags for Lines in range 32 to 63
* @note This bit is set when the falling edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll FPR2 FPIFx LL_EXTI_ClearFallingFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFallingFlag_32_63(uint32_t ExtiLine)
{
WRITE_REG(EXTI->FPR2, ExtiLine);
}
/**
* @brief Check if the ExtLine Rising Flag is set or not for Lines in range 0 to 31
* @note This bit is set when the Rising edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll RPR1 RPIFx LL_EXTI_IsActiveRisingFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveRisingFlag_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->RPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Check if the ExtLine Rising Flag is set or not for Lines in range 32 to 63
* @note This bit is set when the rising edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll RPR2 RPIFx LL_EXTI_IsActiveRisingFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveRisingFlag_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->RPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Read ExtLine Combination Rising Flag for Lines in range 0 to 31
* @note This bit is set when the Rising edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll RPR1 RPIFx LL_EXTI_ReadRisingFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadRisingFlag_0_31(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->RPR1, ExtiLine));
}
/**
* @brief Read ExtLine Combination Rising Flag for Lines in range 32 to 63
* @note This bit is set when the rising edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll RPR2 RPIFx LL_EXTI_ReadRisingFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadRisingFlag_32_63(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->RPR2, ExtiLine));
}
/**
* @brief Clear ExtLine Rising Flags for Lines in range 0 to 31
* @note This bit is set when the Rising edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll RPR1 RPIFx LL_EXTI_ClearRisingFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearRisingFlag_0_31(uint32_t ExtiLine)
{
WRITE_REG(EXTI->RPR1, ExtiLine);
}
/**
* @brief Clear ExtLine Rising Flags for Lines in range 32 to 63
* @note This bit is set when the rising edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll RPR2 RPIFx LL_EXTI_ClearRisingFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_53
*
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearRisingFlag_32_63(uint32_t ExtiLine)
{
WRITE_REG(EXTI->RPR2, ExtiLine);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Config EF configuration functions
* @{
*/
/**
* @brief Configure source input for the EXTI external interrupt.
* @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR1 EXTI1 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR1 EXTI2 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR1 EXTI3 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR2 EXTI4 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR2 EXTI5 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR2 EXTI6 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR2 EXTI7 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR3 EXTI8 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR3 EXTI9 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR3 EXTI10 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR3 EXTI11 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR4 EXTI12 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR4 EXTI13 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR4 EXTI14 LL_EXTI_SetEXTISource\n
* EXTI_EXTICR4 EXTI15 LL_EXTI_SetEXTISource
* @param Port This parameter can be one of the following values:
* @arg @ref LL_EXTI_EXTI_PORTA
* @arg @ref LL_EXTI_EXTI_PORTB
* @arg @ref LL_EXTI_EXTI_PORTC
* @arg @ref LL_EXTI_EXTI_PORTD
* @arg @ref LL_EXTI_EXTI_PORTE (*)
* @arg @ref LL_EXTI_EXTI_PORTF (*)
* @arg @ref LL_EXTI_EXTI_PORTG (*)
* @arg @ref LL_EXTI_EXTI_PORTH
* @arg @ref LL_EXTI_EXTI_PORTI (*)
*
* (*) value not defined in all devices
* @param Line This parameter can be one of the following values:
* @arg @ref LL_EXTI_EXTI_LINE0
* @arg @ref LL_EXTI_EXTI_LINE1
* @arg @ref LL_EXTI_EXTI_LINE2
* @arg @ref LL_EXTI_EXTI_LINE3
* @arg @ref LL_EXTI_EXTI_LINE4
* @arg @ref LL_EXTI_EXTI_LINE5
* @arg @ref LL_EXTI_EXTI_LINE6
* @arg @ref LL_EXTI_EXTI_LINE7
* @arg @ref LL_EXTI_EXTI_LINE8
* @arg @ref LL_EXTI_EXTI_LINE9
* @arg @ref LL_EXTI_EXTI_LINE10
* @arg @ref LL_EXTI_EXTI_LINE11
* @arg @ref LL_EXTI_EXTI_LINE12
* @arg @ref LL_EXTI_EXTI_LINE13
* @arg @ref LL_EXTI_EXTI_LINE14
* @arg @ref LL_EXTI_EXTI_LINE15
* @retval None
*/
__STATIC_INLINE void LL_EXTI_SetEXTISource(uint32_t Port, uint32_t Line)
{
MODIFY_REG(EXTI->EXTICR[Line & 0x03U], EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT), \
Port << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT));
}
/**
* @brief Get the configured defined for specific EXTI Line
* @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR1 EXTI1 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR1 EXTI2 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR1 EXTI3 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR2 EXTI4 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR2 EXTI5 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR2 EXTI6 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR2 EXTI7 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR3 EXTI8 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR3 EXTI9 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR3 EXTI10 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR3 EXTI11 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR4 EXTI12 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR4 EXTI13 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR4 EXTI14 LL_EXTI_GetEXTISource\n
* EXTI_EXTICR4 EXTI15 LL_EXTI_GetEXTISource
* @param Line This parameter can be one of the following values:
* @arg @ref LL_EXTI_EXTI_LINE0
* @arg @ref LL_EXTI_EXTI_LINE1
* @arg @ref LL_EXTI_EXTI_LINE2
* @arg @ref LL_EXTI_EXTI_LINE3
* @arg @ref LL_EXTI_EXTI_LINE4
* @arg @ref LL_EXTI_EXTI_LINE5
* @arg @ref LL_EXTI_EXTI_LINE6
* @arg @ref LL_EXTI_EXTI_LINE7
* @arg @ref LL_EXTI_EXTI_LINE8
* @arg @ref LL_EXTI_EXTI_LINE9
* @arg @ref LL_EXTI_EXTI_LINE10
* @arg @ref LL_EXTI_EXTI_LINE11
* @arg @ref LL_EXTI_EXTI_LINE12
* @arg @ref LL_EXTI_EXTI_LINE13
* @arg @ref LL_EXTI_EXTI_LINE14
* @arg @ref LL_EXTI_EXTI_LINE15
* @retval Returned value can be one of the following values:
* @arg @ref LL_EXTI_EXTI_PORTA
* @arg @ref LL_EXTI_EXTI_PORTB
* @arg @ref LL_EXTI_EXTI_PORTC
* @arg @ref LL_EXTI_EXTI_PORTD
* @arg @ref LL_EXTI_EXTI_PORTE (*)
* @arg @ref LL_EXTI_EXTI_PORTF (*)
* @arg @ref LL_EXTI_EXTI_PORTG (*)
* @arg @ref LL_EXTI_EXTI_PORTH
* @arg @ref LL_EXTI_EXTI_PORTI (*)
*
* (*) value not defined in all devices
*/
__STATIC_INLINE uint32_t LL_EXTI_GetEXTISource(uint32_t Line)
{
return (uint32_t)(READ_BIT(EXTI->EXTICR[Line & 0x03U],
(EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT))) >>
(Line >> LL_EXTI_REGISTER_PINPOS_SHFT));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Secure_Management Secure_Management
* @{
*/
#if defined(__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U)
/**
* @brief Enable ExtiLine Secure attribute for Lines in range 0 to 31
* @rmtoll SECCFGR1 SECx LL_EXTI_EnableSecure_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableSecure_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->SECCFGR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Secure attribute for Lines in range 32 to 63
* @rmtoll SECCFGR2 SECx LL_EXTI_EnableSecure_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableSecure_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->SECCFGR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Secure attribute for Lines in range 0 to 31
* @rmtoll SECCFGR1 SECx LL_EXTI_DisableSecure_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableSecure_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->SECCFGR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Secure attribute for Lines in range 32 to 63
* @rmtoll SECCFGR2 SECx LL_EXTI_DisableSecure_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableSecure_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->SECCFGR2, ExtiLine);
}
#endif /* __ARM_FEATURE_CMSE */
#if defined(EXTI_SECENR1_SEC0)
/**
* @brief Indicate if ExtiLine Secure attribute is enabled for Lines in range 0 to 31
* @rmtoll SECCFGR1 SECx LL_EXTI_IsEnabledSecure_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledSecure_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->SECCFGR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Indicate if ExtiLine Secure attribute is enabled for Lines in range 32 to 63
* @rmtoll SECCFGR2 SECx LL_EXTI_IsEnabledSecure_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledSecure_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->SECCFGR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
#endif /* EXTI_SECENR1_SEC0 */
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Privilege_Management Privilege_Management
* @{
*/
/**
* @brief Enable ExtiLine Privilege attribute for Lines in range 0 to 31
* @rmtoll PRIVCFGR1 PRIVx LL_EXTI_EnablePrivilege_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnablePrivilege_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->PRIVCFGR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Privilege attribute for Lines in range 32 to 63
* @rmtoll PRIVCFGR2 PRIVx LL_EXTI_EnablePrivilege_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnablePrivilege_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->PRIVCFGR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Privilege attribute for Lines in range 0 to 31
* @rmtoll PRIVCFGR1 PRIVx LL_EXTI_DisablePrivilege_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisablePrivilege_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->PRIVCFGR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Privilege attribute for Lines in range 32 to 63
* @rmtoll PRIVCFGR2 PRIVx LL_EXTI_DisablePrivilege_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisablePrivilege_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->PRIVCFGR2, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Privilege attribute is enabled for Lines in range 0 to 31
* @rmtoll PRIVCFGR1 PRIVx LL_EXTI_IsEnabledPrivilege_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledPrivilege_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->PRIVCFGR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
/**
* @brief Indicate if ExtiLine Privilege attribute is enabled for Lines in range 32 to 63
* @rmtoll PRIVCFGR2 PRIVx LL_EXTI_IsEnabledPrivilege_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledPrivilege_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->PRIVCFGR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
/**
* @brief Enable the EXTI lock attributes.
* @rmtoll LOCKR LOCK LL_EXTI_EnableLockAttribute
* @retval None.
*/
__STATIC_INLINE void LL_EXTI_EnableLockAttribute(void)
{
SET_BIT(EXTI->LOCKR, EXTI_LOCKR_LOCK);
}
/**
* @brief Check if EXTI attributes are locked.
* @rmtoll LOCKR LOCK LL_EXTI_IsEnabledLockAttribute
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledLockAttribute(void)
{
return ((READ_BIT(EXTI->LOCKR, EXTI_LOCKR_LOCK) == EXTI_LOCKR_LOCK) ? 1UL : 0UL);
}
#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
* @{
*/
ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
ErrorStatus LL_EXTI_DeInit(void);
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* EXTI */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H5xx_LL_EXTI_H */
Reference in New Issue View Git Blame Copy Permalink