SocChina2025/BlindCane
1
0
Fork 0
generated from Template/H563ZI-HAL-CMake-Template
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
aa43e211031c8c1f6e6c6156844732c136fedee8
BlindCane/Core/Src/tx_initialize_low_level.S
chauyin aa43e21103 开启 ThreadX
2025-05-07 22:53:45 +08:00

644 lines
30 KiB
ArmAsm
Raw Blame History

// by default AzureRTOS is configured to use static byte pool for
// allocation, in case dynamic allocation is to be used, uncomment
// the define below and update the linker files to define the following symbols
// EWARM toolchain:
// place in RAM_region { last section FREE_MEM};
// MDK-ARM toolchain;
// either define the RW_IRAM1 region in the ".sct" file or modify this file by referring to the correct memory region.
// LDR r1, =|Image$$RW_IRAM1$$ZI$$Limit|
// STM32CubeIDE toolchain:
// ._threadx_heap :
// {
// . = ALIGN(8);
// __RAM_segment_used_end__ = .;
// . = . + 64K;
// . = ALIGN(8);
// } >RAM_D1 AT> RAM_D1
// The simplest way to provide memory for ThreadX is to define a new section, see ._threadx_heap above.
// In the example above the ThreadX heap size is set to 64KBytes.
// The ._threadx_heap must be located between the .bss and the ._user_heap_stack sections in the linker script.
// Caution: Make sure that ThreadX does not need more than the provided heap memory (64KBytes in this example).
// Read more in STM32CubeIDE User Guide, chapter: "Linker script".
//#define USE_DYNAMIC_MEMORY_ALLOCATION
#if defined (__clang__)
/**************************************************************************/
/* */
/* Copyright (c) Microsoft Corporation. All rights reserved. */
/* */
/* This software is licensed under the Microsoft Software License */
/* Terms for Microsoft Azure RTOS. Full text of the license can be */
/* found in the LICENSE file at https://aka.ms/AzureRTOS_EULA */
/* and in the root directory of this software. */
/* */
/**************************************************************************/
/**************************************************************************/
/**************************************************************************/
/** */
/** ThreadX Component */
/** */
/** Initialize */
/** */
/**************************************************************************/
/**************************************************************************/
SYSTEM_CLOCK = 250000000
SYSTICK_CYCLES = ((SYSTEM_CLOCK / 100) -1)
/**************************************************************************/
/* */
/* FUNCTION RELEASE */
/* */
/* _tx_initialize_low_level Cortex-M33/AC6 */
/* 6.1 */
/* AUTHOR */
/* */
/* Scott Larson, Microsoft Corporation */
/* */
/* DESCRIPTION */
/* */
/* This function is responsible for any low-level processor */
/* initialization, including setting up interrupt vectors, setting */
/* up a periodic timer interrupt source, saving the system stack */
/* pointer for use in ISR processing later, and finding the first */
/* available RAM memory address for tx_application_define. */
/* */
/* INPUT */
/* */
/* None */
/* */
/* OUTPUT */
/* */
/* None */
/* */
/* CALLS */
/* */
/* None */
/* */
/* CALLED BY */
/* */
/* _tx_initialize_kernel_enter ThreadX entry function */
/* */
/* RELEASE HISTORY */
/* */
/* DATE NAME DESCRIPTION */
/* */
/* 09-30-2020 Scott Larson Initial Version 6.1 */
/* */
/**************************************************************************/
// VOID _tx_initialize_low_level(VOID)
// {
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global _tx_initialize_low_level
.thumb_func
.type _tx_initialize_low_level, function
_tx_initialize_low_level:
/* Disable interrupts during ThreadX initialization. */
CPSID i
/* Set base of available memory to end of non-initialised RAM area. */
#ifdef USE_DYNAMIC_MEMORY_ALLOCATION
LDR r0, =_tx_initialize_unused_memory // Build address of unused memory pointer
LDR r1, =Image$$RW_IRAM1$$ZI$$Limit // Build first free address
ADD r1, r1, #4 //
STR r1, [r0] // Setup first unused memory pointer
#endif
/* Setup Vector Table Offset Register. */
MOV r0, #0xE000E000 // Build address of NVIC registers
LDR r1, =__Vectors // Pickup address of vector table
STR r1, [r0, #0xD08] // Set vector table address
/* Enable the cycle count register. */
LDR r0, =0xE0001000 // Build address of DWT register
LDR r1, [r0] // Pickup the current value
ORR r1, r1, #1 // Set the CYCCNTENA bit
STR r1, [r0] // Enable the cycle count register
/* Set system stack pointer from vector value. */
LDR r0, =_tx_thread_system_stack_ptr // Build address of system stack pointer
LDR r1, =__Vectors // Pickup address of vector table
LDR r1, [r1] // Pickup reset stack pointer
STR r1, [r0] // Save system stack pointer
/* Configure SysTick. */
MOV r0, #0xE000E000 // Build address of NVIC registers
LDR r1, =SYSTICK_CYCLES
STR r1, [r0, #0x14] // Setup SysTick Reload Value
MOV r1, #0x7 // Build SysTick Control Enable Value
STR r1, [r0, #0x10] // Setup SysTick Control
/* Configure handler priorities. */
LDR r1, =0x00000000 // Rsrv, UsgF, BusF, MemM
STR r1, [r0, #0xD18] // Setup System Handlers 4-7 Priority Registers
LDR r1, =0xFF000000 // SVCl, Rsrv, Rsrv, Rsrv
STR r1, [r0, #0xD1C] // Setup System Handlers 8-11 Priority Registers
// Note: SVC must be lowest priority, which is 0xFF
LDR r1, =0x40FF0000 // SysT, PnSV, Rsrv, DbgM
STR r1, [r0, #0xD20] // Setup System Handlers 12-15 Priority Registers
// Note: PnSV must be lowest priority, which is 0xFF
/* Return to caller. */
BX lr
// }
/* Define shells for each of the unused vectors. */
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_BadHandler
.thumb_func
.type __tx_BadHandler, function
__tx_BadHandler:
B __tx_BadHandler
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_IntHandler
.thumb_func
.type __tx_IntHandler, function
__tx_IntHandler:
// VOID InterruptHandler (VOID)
// {
PUSH {r0,lr} // Save LR (and dummy r0 to maintain stack alignment)
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_enter // Call the ISR enter function
#endif
/* Do interrupt handler work here */
/* .... */
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_exit // Call the ISR exit function
#endif
POP {r0,lr}
BX LR
// }
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global SysTick_Handler
.thumb_func
.type SysTick_Handler, function
SysTick_Handler:
// VOID TimerInterruptHandler (VOID)
// {
PUSH {r0,lr} // Save LR (and dummy r0 to maintain stack alignment)
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_enter // Call the ISR enter function
#endif
BL _tx_timer_interrupt
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_exit // Call the ISR exit function
#endif
POP {r0,lr}
BX LR
// }
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_NMIHandler
.thumb_func
.type __tx_NMIHandler, function
__tx_NMIHandler:
B __tx_NMIHandler
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_DBGHandler
.thumb_func
.type __tx_DBGHandler, function
__tx_DBGHandler:
B __tx_DBGHandler
.end
#endif
#if defined(__IAR_SYSTEMS_ASM__)
;/**************************************************************************/
;/* */
;/* Copyright (c) Microsoft Corporation. All rights reserved. */
;/* */
;/* This software is licensed under the Microsoft Software License */
;/* Terms for Microsoft Azure RTOS. Full text of the license can be */
;/* found in the LICENSE file at https://aka.ms/AzureRTOS_EULA */
;/* and in the root directory of this software. */
;/* */
;/**************************************************************************/
;
;
;/**************************************************************************/
;/**************************************************************************/
;/** */
;/** ThreadX Component */
;/** */
;/** Initialize */
;/** */
;/**************************************************************************/
;/**************************************************************************/
;
;
EXTERN _tx_thread_system_stack_ptr
EXTERN _tx_initialize_unused_memory
EXTERN _tx_timer_interrupt
EXTERN _tx_execution_isr_enter
EXTERN _tx_execution_isr_exit
EXTERN __vector_table
;
;
SYSTEM_CLOCK EQU 250000000
SYSTICK_CYCLES EQU ((SYSTEM_CLOCK / 100) -1)
;
;
#ifdef USE_DYNAMIC_MEMORY_ALLOCATION
RSEG FREE_MEM:DATA
PUBLIC __tx_free_memory_start
__tx_free_memory_start
DS32 4
#endif
;
;
SECTION `.text`:CODE:NOROOT(2)
THUMB
;/**************************************************************************/
;/* */
;/* FUNCTION RELEASE */
;/* */
;/* _tx_initialize_low_level Cortex-M33/IAR */
;/* 6.1 */
;/* AUTHOR */
;/* */
;/* Scott Larson, Microsoft Corporation */
;/* */
;/* DESCRIPTION */
;/* */
;/* This function is responsible for any low-level processor */
;/* initialization, including setting up interrupt vectors, setting */
;/* up a periodic timer interrupt source, saving the system stack */
;/* pointer for use in ISR processing later, and finding the first */
;/* available RAM memory address for tx_application_define. */
;/* */
;/* INPUT */
;/* */
;/* None */
;/* */
;/* OUTPUT */
;/* */
;/* None */
;/* */
;/* CALLS */
;/* */
;/* None */
;/* */
;/* CALLED BY */
;/* */
;/* _tx_initialize_kernel_enter ThreadX entry function */
;/* */
;/* RELEASE HISTORY */
;/* */
;/* DATE NAME DESCRIPTION */
;/* */
;/* 09-30-2020 Scott Larson Initial Version 6.1 */
;/* */
;/**************************************************************************/
;VOID _tx_initialize_low_level(VOID)
;{
PUBLIC _tx_initialize_low_level
_tx_initialize_low_level:
;
; /* Disable interrupts during ThreadX initialization. */
;
CPSID i
;
; /* Set base of available memory to end of non-initialised RAM area. */
;
#ifdef USE_DYNAMIC_MEMORY_ALLOCATION
LDR r0, =_tx_initialize_unused_memory ; Build address of unused memory pointer
LDR r1, =__tx_free_memory_start ; Build first free address
STR r1, [r0] ; Setup first unused memory pointer
#endif
;
; /* Setup Vector Table Offset Register. */
;
MOV r0, #0xE000E000 ; Build address of NVIC registers
LDR r1, =__vector_table ; Pickup address of vector table
STR r1, [r0, #0xD08] ; Set vector table address
;
; /* Enable the cycle count register. */
;
; LDR r0, =0xE0001000 ; Build address of DWT register
; LDR r1, [r0] ; Pickup the current value
; ORR r1, r1, #1 ; Set the CYCCNTENA bit
; STR r1, [r0] ; Enable the cycle count register
;
; /* Set system stack pointer from vector value. */
;
LDR r0, =_tx_thread_system_stack_ptr ; Build address of system stack pointer
LDR r1, =__vector_table ; Pickup address of vector table
LDR r1, [r1] ; Pickup reset stack pointer
STR r1, [r0] ; Save system stack pointer
;
; /* Configure SysTick. */
;
MOV r0, #0xE000E000 ; Build address of NVIC registers
LDR r1, =SYSTICK_CYCLES
STR r1, [r0, #0x14] ; Setup SysTick Reload Value
MOV r1, #0x7 ; Build SysTick Control Enable Value
STR r1, [r0, #0x10] ; Setup SysTick Control
;
; /* Configure handler priorities. */
;
LDR r1, =0x00000000 ; Rsrv, UsgF, BusF, MemM
STR r1, [r0, #0xD18] ; Setup System Handlers 4-7 Priority Registers
LDR r1, =0xFF000000 ; SVCl, Rsrv, Rsrv, Rsrv
STR r1, [r0, #0xD1C] ; Setup System Handlers 8-11 Priority Registers
; Note: SVC must be lowest priority, which is 0xFF
LDR r1, =0x40FF0000 ; SysT, PnSV, Rsrv, DbgM
STR r1, [r0, #0xD20] ; Setup System Handlers 12-15 Priority Registers
; Note: PnSV must be lowest priority, which is 0xFF
;
; /* Return to caller. */
;
BX lr
;}
;
;
;/* Define shells for each of the unused vectors. */
;
PUBLIC __tx_BadHandler
__tx_BadHandler:
B __tx_BadHandler
PUBLIC __tx_IntHandler
__tx_IntHandler:
// VOID InterruptHandler (VOID)
// {
PUSH {r0,lr} // Save LR (and dummy r0 to maintain stack alignment)
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_enter // Call the ISR enter function
#endif
/* Do interrupt handler work here */
/* .... */
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_exit // Call the ISR exit function
#endif
POP {r0,lr}
BX lr
// }
PUBLIC __tx_SysTickHandler
PUBLIC SysTick_Handler
SysTick_Handler:
__tx_SysTickHandler:
// VOID TimerInterruptHandler (VOID)
// {
PUSH {r0,lr} // Save LR (and dummy r0 to maintain stack alignment)
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_enter // Call the ISR enter function
#endif
BL _tx_timer_interrupt
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_exit // Call the ISR exit function
#endif
POP {r0,lr}
BX lr
// }
PUBLIC __tx_NMIHandler
__tx_NMIHandler:
B __tx_NMIHandler
PUBLIC __tx_DBGHandler
__tx_DBGHandler:
B __tx_DBGHandler
END
#endif
#if (defined(__GNUC__) && !defined(__clang__))
/**************************************************************************/
/* */
/* Copyright (c) Microsoft Corporation. All rights reserved. */
/* */
/* This software is licensed under the Microsoft Software License */
/* Terms for Microsoft Azure RTOS. Full text of the license can be */
/* found in the LICENSE file at https://aka.ms/AzureRTOS_EULA */
/* and in the root directory of this software. */
/* */
/**************************************************************************/
/**************************************************************************/
/**************************************************************************/
/** */
/** ThreadX Component */
/** */
/** Initialize */
/** */
/**************************************************************************/
/**************************************************************************/
SYSTEM_CLOCK = 250000000
SYSTICK_CYCLES = ((SYSTEM_CLOCK / 100) -1)
/**************************************************************************/
/* */
/* FUNCTION RELEASE */
/* */
/* _tx_initialize_low_level Cortex-M33/GNU */
/* 6.1 */
/* AUTHOR */
/* */
/* Scott Larson, Microsoft Corporation */
/* */
/* DESCRIPTION */
/* */
/* This function is responsible for any low-level processor */
/* initialization, including setting up interrupt vectors, setting */
/* up a periodic timer interrupt source, saving the system stack */
/* pointer for use in ISR processing later, and finding the first */
/* available RAM memory address for tx_application_define. */
/* */
/* INPUT */
/* */
/* None */
/* */
/* OUTPUT */
/* */
/* None */
/* */
/* CALLS */
/* */
/* None */
/* */
/* CALLED BY */
/* */
/* _tx_initialize_kernel_enter ThreadX entry function */
/* */
/* RELEASE HISTORY */
/* */
/* DATE NAME DESCRIPTION */
/* */
/* 09-30-2020 Scott Larson Initial Version 6.1 */
/* */
/**************************************************************************/
// VOID _tx_initialize_low_level(VOID)
// {
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global _tx_initialize_low_level
.thumb_func
.type _tx_initialize_low_level, function
_tx_initialize_low_level:
/* Disable interrupts during ThreadX initialization. */
CPSID i
/* Set base of available memory to end of non-initialised RAM area. */
#ifdef USE_DYNAMIC_MEMORY_ALLOCATION
LDR r0, =_tx_initialize_unused_memory // Build address of unused memory pointer
LDR r1, =__RAM_segment_used_end__ // Build first free address
ADD r1, r1, #4 //
STR r1, [r0] // Setup first unused memory pointer
#endif
/* Setup Vector Table Offset Register. */
MOV r0, #0xE000E000 // Build address of NVIC registers
LDR r1, =g_pfnVectors // Pickup address of vector table
STR r1, [r0, #0xD08] // Set vector table address
/* Enable the cycle count register. */
LDR r0, =0xE0001000 // Build address of DWT register
LDR r1, [r0] // Pickup the current value
ORR r1, r1, #1 // Set the CYCCNTENA bit
STR r1, [r0] // Enable the cycle count register
/* Set system stack pointer from vector value. */
LDR r0, =_tx_thread_system_stack_ptr // Build address of system stack pointer
LDR r1, =g_pfnVectors // Pickup address of vector table
LDR r1, [r1] // Pickup reset stack pointer
STR r1, [r0] // Save system stack pointer
/* Configure SysTick. */
MOV r0, #0xE000E000 // Build address of NVIC registers
LDR r1, =SYSTICK_CYCLES
STR r1, [r0, #0x14] // Setup SysTick Reload Value
MOV r1, #0x7 // Build SysTick Control Enable Value
STR r1, [r0, #0x10] // Setup SysTick Control
/* Configure handler priorities. */
LDR r1, =0x00000000 // Rsrv, UsgF, BusF, MemM
STR r1, [r0, #0xD18] // Setup System Handlers 4-7 Priority Registers
LDR r1, =0xFF000000 // SVCl, Rsrv, Rsrv, Rsrv
STR r1, [r0, #0xD1C] // Setup System Handlers 8-11 Priority Registers
// Note: SVC must be lowest priority, which is 0xFF
LDR r1, =0x40FF0000 // SysT, PnSV, Rsrv, DbgM
STR r1, [r0, #0xD20] // Setup System Handlers 12-15 Priority Registers
// Note: PnSV must be lowest priority, which is 0xFF
/* Return to caller. */
BX lr
// }
/* Define shells for each of the unused vectors. */
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_BadHandler
.thumb_func
.type __tx_BadHandler, function
__tx_BadHandler:
B __tx_BadHandler
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_IntHandler
.thumb_func
.type __tx_IntHandler, function
__tx_IntHandler:
// VOID InterruptHandler (VOID)
// {
PUSH {r0,lr} // Save LR (and dummy r0 to maintain stack alignment)
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_enter // Call the ISR enter function
#endif
/* Do interrupt handler work here */
/* .... */
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_exit // Call the ISR exit function
#endif
POP {r0,lr}
BX lr
// }
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global SysTick_Handler
.thumb_func
.type SysTick_Handler, function
SysTick_Handler:
// VOID TimerInterruptHandler (VOID)
// {
PUSH {r0,lr} // Save LR (and dummy r0 to maintain stack alignment)
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_enter // Call the ISR enter function
#endif
BL _tx_timer_interrupt
#if (defined(TX_ENABLE_EXECUTION_CHANGE_NOTIFY) || defined(TX_EXECUTION_PROFILE_ENABLE))
BL _tx_execution_isr_exit // Call the ISR exit function
#endif
POP {r0,lr}
BX lr
// }
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_NMIHandler
.thumb_func
.type __tx_NMIHandler, function
__tx_NMIHandler:
B __tx_NMIHandler
.section .text
.balign 4
.syntax unified
.eabi_attribute Tag_ABI_align_preserved, 1
.global __tx_DBGHandler
.thumb_func
.type __tx_DBGHandler, function
__tx_DBGHandler:
B __tx_DBGHandler
.end
#endif
Reference in New Issue View Git Blame Copy Permalink