first commit
This commit is contained in:
chauyin
24017
Drivers/CMSIS/Device/ST/STM32H5xx/Include/stm32h563xx.h
Normal file
24017
Drivers/CMSIS/Device/ST/STM32H5xx/Include/stm32h563xx.h
Normal file
File diff suppressed because it is too large
Load Diff
252
Drivers/CMSIS/Device/ST/STM32H5xx/Include/stm32h5xx.h
Normal file
252
Drivers/CMSIS/Device/ST/STM32H5xx/Include/stm32h5xx.h
Normal file
@@ -0,0 +1,252 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32h5xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS STM32H5xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32H5xx device used in the target application
|
||||
* - To use or not the peripheral<61>s drivers in application code(i.e.
|
||||
* code will be based on direct access to peripheral<61>s registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32h5xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef STM32H5xx_H
|
||||
#define STM32H5xx_H
|
||||
#include "math.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32 Family
|
||||
*/
|
||||
#if !defined (STM32H5)
|
||||
#define STM32H5
|
||||
#endif /* STM32H5 */
|
||||
|
||||
/* Uncomment the line below according to the target STM32H5 device used in your
|
||||
application
|
||||
*/
|
||||
|
||||
#if !defined (STM32H573xx) && !defined (STM32H563xx) \
|
||||
&& !defined (STM32H562xx) && !defined (STM32H503xx) \
|
||||
&& !defined (STM32H533xx) && !defined (STM32H523xx)
|
||||
/* #define STM32H573xx */ /*!< STM32H573xx Devices */
|
||||
/* #define STM32H563xx */ /*!< STM32H563xx Devices */
|
||||
/* #define STM32H562xx */ /*!< STM32H562xx Devices */
|
||||
/* #define STM32H503xx */ /*!< STM32H503xx Devices */
|
||||
/* #define STM32H533xx */ /*!< STM32H533xx Devices */
|
||||
/* #define STM32H523xx */ /*!< STM32H523xx Devices */
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
/*#define USE_HAL_DRIVER */
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number 1.4.0
|
||||
*/
|
||||
#define __STM32H5_CMSIS_VERSION_MAIN (0x01) /*!< [31:24] main version */
|
||||
#define __STM32H5_CMSIS_VERSION_SUB1 (0x04) /*!< [23:16] sub1 version */
|
||||
#define __STM32H5_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
|
||||
#define __STM32H5_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
|
||||
#define __STM32H5_CMSIS_VERSION ((__STM32H5_CMSIS_VERSION_MAIN << 24U)\
|
||||
|(__STM32H5_CMSIS_VERSION_SUB1 << 16U)\
|
||||
|(__STM32H5_CMSIS_VERSION_SUB2 << 8U )\
|
||||
|(__STM32H5_CMSIS_VERSION_RC))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32H5F5xx)
|
||||
#include "stm32h5f5xx.h"
|
||||
#elif defined(STM32H5F4xx)
|
||||
#include "stm32h5f4xx.h"
|
||||
#elif defined(STM32H5E5xx)
|
||||
#include "stm32h5e5xx.h"
|
||||
#elif defined(STM32H5E4xx)
|
||||
#include "stm32h5e4xx.h"
|
||||
#elif defined(STM32H573xx)
|
||||
#include "stm32h573xx.h"
|
||||
#elif defined(STM32H563xx)
|
||||
#include "stm32h563xx.h"
|
||||
#elif defined(STM32H562xx)
|
||||
#include "stm32h562xx.h"
|
||||
#elif defined(STM32H503xx)
|
||||
#include "stm32h503xx.h"
|
||||
#elif defined(STM32H523xx)
|
||||
#include "stm32h523xx.h"
|
||||
#elif defined(STM32H533xx)
|
||||
#include "stm32h533xx.h"
|
||||
#else
|
||||
#error "Please select first the target STM32H5xx device used in your application (in stm32h5xx.h file)"
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RESET = 0,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DISABLE = 0,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum
|
||||
{
|
||||
SUCCESS = 0,
|
||||
ERROR = !SUCCESS
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macros
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
/* Use of CMSIS compiler intrinsics for register exclusive access */
|
||||
/* Atomic 32-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SET_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEAR_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SETH_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEARH_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32h5xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* STM32H5xx_H */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
107
Drivers/CMSIS/Device/ST/STM32H5xx/Include/system_stm32h5xx.h
Normal file
107
Drivers/CMSIS/Device/ST/STM32H5xx/Include/system_stm32h5xx.h
Normal file
@@ -0,0 +1,107 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32h5xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M33 Device System Source File for STM32H5xx devices.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32h5xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef SYSTEM_STM32H5XX_H
|
||||
#define SYSTEM_STM32H5XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32H5xx_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32H5xx_System_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
/* The SystemCoreClock variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
|
||||
|
||||
extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
|
||||
extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32H5xx_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system.
|
||||
*
|
||||
* Initialize the System and update the SystemCoreClock variable.
|
||||
*/
|
||||
extern void SystemInit (void);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable.
|
||||
*
|
||||
* Updates the SystemCoreClock with current core Clock retrieved from cpu registers.
|
||||
*/
|
||||
extern void SystemCoreClockUpdate (void);
|
||||
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable from secure application and return its value
|
||||
* when security is implemented in the system (Non-secure callable function).
|
||||
*
|
||||
* Returns the SystemCoreClock value with current core Clock retrieved from cpu registers.
|
||||
*/
|
||||
extern uint32_t SECURE_SystemCoreClockUpdate(void);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* SYSTEM_STM32H5XX_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
Reference in New Issue
Block a user