添加串口操作类

${REPO_NAME}.ioc

@@ -23,7 +23,8 @@ Mcu.IP4=NVIC
 Mcu.IP5=PWR
 Mcu.IP6=RCC
 Mcu.IP7=SYS
-Mcu.IPNb=9
+Mcu.IP8=TIM7
+Mcu.IPNb=10
 Mcu.Name=STM32H563ZITx
 Mcu.Package=LQFP144
 Mcu.Pin0=PE2
@@ -56,20 +57,22 @@ Mcu.Pin32=PG13
 Mcu.Pin33=PB3(JTDO/TRACESWO)
 Mcu.Pin34=PB6
 Mcu.Pin35=PB7
-Mcu.Pin36=VP_PWR_VS_SECSignals
-Mcu.Pin37=VP_PWR_VS_LPOM
-Mcu.Pin38=VP_PWR_VS_DBSignals
-Mcu.Pin39=VP_SYS_VS_Systick
+Mcu.Pin36=VP_CORTEX_M33_NS_VS_Hclk
+Mcu.Pin37=VP_PWR_VS_SECSignals
+Mcu.Pin38=VP_PWR_VS_LPOM
+Mcu.Pin39=VP_PWR_VS_DBSignals
 Mcu.Pin4=PE6
-Mcu.Pin40=VP_BOOTPATH_VS_BOOTPATH
-Mcu.Pin41=VP_MEMORYMAP_VS_MEMORYMAP
-Mcu.Pin42=VP_NUCLEO-H563ZI_VS_BSP_COMMON
+Mcu.Pin40=VP_SYS_VS_Systick
+Mcu.Pin41=VP_TIM7_VS_ClockSourceINT
+Mcu.Pin42=VP_BOOTPATH_VS_BOOTPATH
+Mcu.Pin43=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin44=VP_NUCLEO-H563ZI_VS_BSP_COMMON
 Mcu.Pin5=PC13
 Mcu.Pin6=PC14-OSC32_IN(OSC32_IN)
 Mcu.Pin7=PC15-OSC32_OUT(OSC32_OUT)
 Mcu.Pin8=PF4
 Mcu.Pin9=PH0-OSC_IN(PH0)
-Mcu.PinsNb=43
+Mcu.PinsNb=45
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32H563ZITx
@@ -273,8 +276,8 @@ ProjectManager.MainLocation=Core/Src
 ProjectManager.NoMain=false
 ProjectManager.PreviousToolchain=
 ProjectManager.ProjectBuild=false
-ProjectManager.ProjectFileName=H563ZI-HAL-CMake-Template.ioc
-ProjectManager.ProjectName=H563ZI-HAL-CMake-Template
+ProjectManager.ProjectFileName=${REPO_NAME}.ioc
+ProjectManager.ProjectName=${REPO_NAME}
 ProjectManager.ProjectStructure=
 ProjectManager.RegisterCallBack=
 ProjectManager.StackSize=0x400
@@ -283,7 +286,7 @@ ProjectManager.ToolChainLocation=
 ProjectManager.UAScriptAfterPath=
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,false-0--NUCLEO-H563ZI-true-HAL-true,0-MX_CORTEX_M33_NS_Init-CORTEX_M33_NS-false-HAL-true,0-MX_PWR_Init-PWR-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,0-MX_CORTEX_M33_NS_Init-CORTEX_M33_NS-false-HAL-true,0-MX_PWR_Init-PWR-false-HAL-true,false-0--NUCLEO-H563ZI-true-HAL-true
 RCC.ADCFreq_Value=250000000
 RCC.AHBFreq_Value=250000000
 RCC.APB1Freq_Value=250000000
@@ -376,8 +379,12 @@ SH.GPXTI13.0=GPIO_EXTI13
 SH.GPXTI13.ConfNb=1
 SH.GPXTI7.0=GPIO_EXTI7
 SH.GPXTI7.ConfNb=1
+TIM7.IPParameters=Prescaler
+TIM7.Prescaler=249
 VP_BOOTPATH_VS_BOOTPATH.Mode=BP_Activate
 VP_BOOTPATH_VS_BOOTPATH.Signal=BOOTPATH_VS_BOOTPATH
+VP_CORTEX_M33_NS_VS_Hclk.Mode=Hclk_Mode
+VP_CORTEX_M33_NS_VS_Hclk.Signal=CORTEX_M33_NS_VS_Hclk
 VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg
 VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP
 VP_NUCLEO-H563ZI_VS_BSP_COMMON.Mode=COMMON
@@ -390,5 +397,7 @@ VP_PWR_VS_SECSignals.Mode=Security/Privilege
 VP_PWR_VS_SECSignals.Signal=PWR_VS_SECSignals
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM7_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM7_VS_ClockSourceINT.Signal=TIM7_VS_ClockSourceINT
 board=NUCLEO-H563ZI
 boardIOC=true

Core/App/Common/serial_port.cpp

@@ -0,0 +1,5 @@
+#include "serial_port.hpp"
+
+extern "C" void HAL_UART_TxCpltCallback([[maybe_unused]] UART_HandleTypeDef* huart) {
+    SerialPort::isTransmitting = false;
+}

Core/App/Common/serial_port.hpp

@@ -0,0 +1,118 @@
+#pragma once
+
+#include "stm32h5xx_nucleo.h"
+#include <cstdarg>
+#include <cstdint>
+#include <cstring>
+#include <string>
+
+class SerialPort {
+private:
+    static constexpr uint32_t kTransmitTimeout = 1000;
+    static constexpr auto* kHandle             = &hcom_uart[COM1];
+
+    static inline char buffer[256] = {0};
+
+    friend void HAL_UART_TxCpltCallback(UART_HandleTypeDef* huart);
+    static inline volatile bool isTransmitting = false;
+
+    static void WaitTransmit() {
+        const auto tick = HAL_GetTick();
+        while (isTransmitting) {
+            if (HAL_GetTick() - tick > kTransmitTimeout) {
+                HAL_UART_AbortTransmit(kHandle);
+                isTransmitting = false;
+            }
+        }
+    }
+
+public:
+    static uint8_t ReadByte() {
+        return kHandle->Instance->RDR;
+    }
+
+    static std::string ReadLine() {
+        std::string result;
+        result.reserve(128);
+        char c;
+        ReadByte();
+        while (true) {
+            HAL_UART_Receive(kHandle, reinterpret_cast<uint8_t*>(&c), 1, HAL_MAX_DELAY);
+            if (c == '\n') {
+                if (!result.empty() && result.back() == '\r') {
+                    result.pop_back();
+                }
+                break;
+            }
+            result.push_back(c);
+        }
+        return result;
+    }
+
+    static void WriteLine(const char* format, ...) {
+        WaitTransmit();
+        isTransmitting = true;
+        va_list args;
+        va_start(args, format);
+        int len = vsnprintf(buffer, sizeof(buffer) - 1, format, args);
+        va_end(args);
+        if (len < 0 || len > static_cast<int>(sizeof(buffer) - 1)) {
+            isTransmitting = false;
+            return;
+        }
+        buffer[len] = '\n';
+        len++;
+        HAL_UART_Transmit_DMA(kHandle, reinterpret_cast<uint8_t*>(buffer), len);
+    }
+
+    static void WriteLineBlocking(const char* format, ...) {
+        WaitTransmit();
+        va_list args;
+        va_start(args, format);
+        int len = vsnprintf(buffer, sizeof(buffer) - 1, format, args);
+        va_end(args);
+        if (len < 0 || len > static_cast<int>(sizeof(buffer) - 1)) {
+            return;
+        }
+        buffer[len] = '\n';
+        len++;
+        HAL_UART_Transmit(kHandle, reinterpret_cast<uint8_t*>(buffer), len, kTransmitTimeout);
+    }
+
+    static void Write(const char* format, ...) {
+        WaitTransmit();
+        isTransmitting = true;
+        va_list args;
+        va_start(args, format);
+        auto len = vsnprintf(buffer, sizeof(buffer), format, args);
+        va_end(args);
+        if (len < 0 || len > static_cast<int>(sizeof(buffer))) {
+            isTransmitting = false;
+            return;
+        }
+        HAL_UART_Transmit_DMA(kHandle, reinterpret_cast<uint8_t*>(buffer), len);
+    }
+
+    static void WriteBlocking(const char* format, ...) {
+        WaitTransmit();
+        va_list args;
+        va_start(args, format);
+        auto len = vsnprintf(buffer, sizeof(buffer), format, args);
+        va_end(args);
+        if (len < 0 || len > static_cast<int>(sizeof(buffer))) {
+            return;
+        }
+        HAL_UART_Transmit(kHandle, reinterpret_cast<uint8_t*>(buffer), strlen(buffer), kTransmitTimeout);
+    }
+
+    static void WriteBytes(const uint8_t* data, size_t size) {
+        WaitTransmit();
+        isTransmitting = true;
+        HAL_UART_Transmit_DMA(kHandle, const_cast<uint8_t*>(data), size);
+    }
+
+    static void WriteBytesBlocking(const uint8_t* data, size_t size) {
+        WaitTransmit();
+        HAL_UART_Transmit(kHandle, const_cast<uint8_t*>(data), size, kTransmitTimeout);
+    }
+};

Core/App/Helper/delay_helper.c

@@ -0,0 +1,29 @@
+//
+// Created by Engineer on 2024/1/11.
+//
+
+#include "delay_helper.h"
+
+#include "tim.h"
+
+void DelaySetup(void) {
+    HAL_TIM_Base_Start(&TIM_DELAY);
+}
+
+void DelayUs(const uint16_t nus) {
+    __HAL_TIM_SET_COUNTER(&TIM_DELAY, 0);
+    while (__HAL_TIM_GET_COUNTER(&TIM_DELAY) < nus) {
+    }
+}
+
+void DelayMs(const uint32_t nms) {
+    for (uint32_t i = 0; i < nms; ++i) {
+        DelayUs(1000);
+    }
+}
+
+void DelayS(const uint32_t ns) {
+    for (uint32_t i = 0; i < ns; ++i) {
+        DelayMs(1000);
+    }
+}

Core/App/Helper/delay_helper.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "main.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define TIM_DELAY htim7
+
+void DelaySetup(void);
+void DelayUs(uint16_t nus);
+void DelayMs(uint32_t nms);
+void DelayS(uint32_t ns);
+
+#ifdef __cplusplus
+}
+#endif

Core/App/Helper/gpio_helper.hpp

@@ -0,0 +1,70 @@
+#pragma once
+
+#include "main.h"
+#include <optional>
+#include <string_view>
+
+class GpioHelper {
+public:
+    struct Gpio {
+        GPIO_TypeDef* port;
+        uint16_t pin;
+
+        void Set() const {
+            port->BSRR = pin;
+        }
+
+        void Reset() const {
+            port->BSRR = pin << 16;
+        }
+
+        void Toggle() const {
+            port->ODR ^= pin;
+        }
+
+        [[nodiscard]] GPIO_PinState Read() const {
+            return port->IDR & pin ? GPIO_PIN_SET : GPIO_PIN_RESET;
+        }
+    };
+
+    struct GpioPlus {
+        std::string_view name;
+        Gpio gpio;
+    };
+
+    static void EnableAllGpioPeripheral() {
+        __HAL_RCC_GPIOA_CLK_ENABLE();
+        __HAL_RCC_GPIOB_CLK_ENABLE();
+        __HAL_RCC_GPIOC_CLK_ENABLE();
+        __HAL_RCC_GPIOD_CLK_ENABLE();
+        __HAL_RCC_GPIOE_CLK_ENABLE();
+        __HAL_RCC_GPIOF_CLK_ENABLE();
+        __HAL_RCC_GPIOG_CLK_ENABLE();
+    }
+
+    static Gpio GpioInit(GPIO_TypeDef* port, const uint16_t pin, const uint32_t mode, const uint32_t pull,
+        const std::optional<GPIO_PinState> state = std::nullopt) {
+        static GPIO_InitTypeDef o = {};
+        if (state.has_value()) {
+            HAL_GPIO_WritePin(port, pin, state.value());
+        }
+        o.Pin   = pin;
+        o.Mode  = mode;
+        o.Pull  = pull;
+        o.Speed = GPIO_SPEED_FREQ_LOW;
+        HAL_GPIO_Init(port, &o);
+        return {port, pin};
+    }
+
+    static Gpio GpioInit(const Gpio& gpio, const uint32_t mode, const uint32_t pull, const GPIO_PinState state) {
+        return GpioInit(gpio.port, gpio.pin, mode, pull, state);
+    }
+
+    static void GpioDeInit(const Gpio& gpio) {
+        HAL_GPIO_DeInit(gpio.port, gpio.pin);
+    }
+
+    static void GpioDeInit(GPIO_TypeDef* port, const uint16_t pin) {
+        HAL_GPIO_DeInit(port, pin);
+    }
+};

Core/App/app.cpp

@@ -0,0 +1,21 @@
+#include "Helper/delay_helper.h"
+#include "stm32h563xx.h"
+
+#include "Common/serial_port.hpp"
+#include "Helper/gpio_helper.hpp"
+
+
+void Setup() {
+    GpioHelper::EnableAllGpioPeripheral();
+    DelaySetup();
+}
+
+extern "C" void AppStart() {
+    Setup();
+    auto gpio = GpioHelper::GpioInit(GPIOB, GPIO_PIN_0, GPIO_MODE_OUTPUT_PP, GPIO_NOPULL, GPIO_PIN_SET);
+    while (true) {
+        gpio.Toggle();
+        SerialPort::WriteLine("LED is toggled,current state: %s", gpio.Read() ? "OFF" : "ON");
+        DelayS(1);
+    }
+}

Core/Inc/stm32h5xx_hal_conf.h

@@ -78,7 +78,7 @@
 /*#define HAL_SMBUS_MODULE_ENABLED */
 /*#define HAL_SPI_MODULE_ENABLED */
 /*#define HAL_SRAM_MODULE_ENABLED */
-/*#define HAL_TIM_MODULE_ENABLED */
+#define HAL_TIM_MODULE_ENABLED
 /*#define HAL_RAMCFG_MODULE_ENABLED */
 #define HAL_UART_MODULE_ENABLED
 /*#define HAL_USART_MODULE_ENABLED */

Core/Inc/tim.h

@@ -0,0 +1,52 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    tim.h
+  * @brief   This file contains all the function prototypes for
+  *          the tim.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TIM_H__
+#define __TIM_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern TIM_HandleTypeDef htim7;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_TIM7_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_H__ */
+

Core/Src/main.c

@@ -19,6 +19,7 @@
 /* Includes ------------------------------------------------------------------*/
 #include "main.h"
 #include "memorymap.h"
+#include "tim.h"
 #include "gpio.h"
 
 /* Private includes ----------------------------------------------------------*/
@@ -57,7 +58,7 @@ void SystemClock_Config(void);
 
 /* Private user code ---------------------------------------------------------*/
 /* USER CODE BEGIN 0 */
-
+extern void AppStart(void);
 /* USER CODE END 0 */
 
 /**
@@ -89,6 +90,7 @@ int main(void)
 
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
+  MX_TIM7_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -114,6 +116,7 @@ int main(void)
 
   /* Infinite loop */
   /* USER CODE BEGIN WHILE */
+  AppStart();
   while (1)
   {
 

Core/Src/tim.c

@@ -0,0 +1,97 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    tim.c
+  * @brief   This file provides code for the configuration
+  *          of the TIM instances.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "tim.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+TIM_HandleTypeDef htim7;
+
+/* TIM7 init function */
+void MX_TIM7_Init(void)
+{
+
+  /* USER CODE BEGIN TIM7_Init 0 */
+
+  /* USER CODE END TIM7_Init 0 */
+
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+  /* USER CODE BEGIN TIM7_Init 1 */
+
+  /* USER CODE END TIM7_Init 1 */
+  htim7.Instance = TIM7;
+  htim7.Init.Prescaler = 249;
+  htim7.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim7.Init.Period = 65535;
+  htim7.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim7) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim7, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM7_Init 2 */
+
+  /* USER CODE END TIM7_Init 2 */
+
+}
+
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM7)
+  {
+  /* USER CODE BEGIN TIM7_MspInit 0 */
+
+  /* USER CODE END TIM7_MspInit 0 */
+    /* TIM7 clock enable */
+    __HAL_RCC_TIM7_CLK_ENABLE();
+  /* USER CODE BEGIN TIM7_MspInit 1 */
+
+  /* USER CODE END TIM7_MspInit 1 */
+  }
+}
+
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM7)
+  {
+  /* USER CODE BEGIN TIM7_MspDeInit 0 */
+
+  /* USER CODE END TIM7_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM7_CLK_DISABLE();
+  /* USER CODE BEGIN TIM7_MspDeInit 1 */
+
+  /* USER CODE END TIM7_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

cmake/stm32cubemx/CMakeLists.txt

@@ -24,6 +24,7 @@ set(MX_Application_Src
     ${CMAKE_SOURCE_DIR}/Core/Src/main.c
     ${CMAKE_SOURCE_DIR}/Core/Src/gpio.c
     ${CMAKE_SOURCE_DIR}/Core/Src/memorymap.c
+    ${CMAKE_SOURCE_DIR}/Core/Src/tim.c
     ${CMAKE_SOURCE_DIR}/Core/Src/stm32h5xx_it.c
     ${CMAKE_SOURCE_DIR}/Core/Src/stm32h5xx_hal_msp.c
     ${CMAKE_SOURCE_DIR}/Core/Src/sysmem.c
@@ -46,6 +47,8 @@ set(STM32_Drivers_Src
     ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c
     ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal.c
     ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_exti.c
+    ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_tim.c
+    ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_tim_ex.c
     ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_usart.c
     ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_usart_ex.c
     ${CMAKE_SOURCE_DIR}/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_uart_ex.c